2024宇宙1519

UNVERFERTH 1519-X-TREME单螺旋谷物车与UNVERFERTH全新的19系列X-TREME谷物车一起将您的收获发挥到极致. Featuring an exclusive front-folding, single corner-auger with a 转发到ing design, 19系列的谷物车的位置落水管前面的hitch为增强视线从拖拉机驾驶室. The upper auger folds diagonally across the front of the grain cart, permitting a longer upper auger which increases side reach 和高度. The all-new four-way downspout features an increased range of motion for added operator convenience. 可在1550-, 1330-, 1100- and 1000-bushel carrying capacities with unloading speeds up to 650 bushels per minute! Unverferth 19系列X-TREME谷物车采用创新设计，增加了操作人员的舒适度, 提高卸载精度, and will make your harvest more efficient. The 19-Series X-TREME grain carts can truly take your harvest to the extreme.增强视线 独家, forward-reaching, front-folding corner-auger increases the upper auger length for enhanced auger side reach, 转发到, 和高度.• 这使得操作人员可以从拖拉机驾驶室的侧窗轻松地观察到下水管，从而减少疲劳并最大限度地降低溢出的风险.极端的卸载• 当落水管垂直向下时，卸载精度得到了优化，19系列X-TREME谷物车在这个位置提供了高达10英尺的螺旋钻侧面到达, reducing the risk of throwing grain off target.• 在现场工作时，上部螺旋钻的一个方便的无工具现场支架可以扩展，以便更快地折叠和展开到卸载位置. When in the transport position, the upper auger folds within the width of the tank for safer road transport.螺旋飞行• 为了提高卸荷效率，卸荷速度可达每分钟650蒲式耳，21英寸直径的螺旋钻可转换为20英寸直径的螺旋钻.• 专门设计的3/8”厚最大边缘螺旋钻飞行具有额外的1/4”厚耐磨(AR400)条(该条是除了3/8, 总厚度为5/8英寸)，焊接在高容量区域，以增加耐用性和延长飞行寿命.• 正在申请专利的飞行翼在过渡区提供了一个连续的飞行流的平稳和有效的转移粮食.• 专利橡胶缓冲螺旋钻连接保护上下垂直螺旋钻免受恶劣牵引器PTO啮合. Reducing stress helps extend the life of the driveline. Electronic balancing of the upper and lower augers eliminates vibration, providing a smooth unload.卸载控制• 标准的4路定向下水管提供近4英尺的进出和4英尺的左右控制，排出高度变化最小，可以轻松地在拖拉机运动有限的情况下给卡车加满油. 液压驱动的齿轮马达上的落水管提供了一个平稳和响应的感觉时，调整从一边到另一边.操作方便• 获得专利的螺旋钻设计采用了经过现场验证的u型接头过渡，使上部螺旋钻向外倾斜, upward and forward for increased auger side reach, height and better visibility from the side window of the tractor cab.• Dual spout-mounted LED unloading lights permit easy nighttime operation.• 缓冲的螺旋钻折叠气缸轻轻折叠并展开上部螺旋钻进入操作和运输位置. When in the operating position, 液压锁紧机构将上下螺旋钻紧紧地锁在一起，以实现无泄漏密封.坦克设计• 模型1519, 1319, 1119 and 1019 feature tank capacities of 1,550, 1,330, 1,100和1,000 bushels to meet individual grower preferences.• The 19-Series X-TREME tank features an exclusive deep sump design, which funnels grain down into the auger for fast and complete unloading. Industry-leading 40° front and 30° rear tank slopes with graphite coating ensures complete cleanout, regardless of the grain moisture.• During the exclusive manufacturing process, 侧板卷曲增加强度和暴露的接缝是密封的硅胶耐腐蚀.液压闸门 液压操作的36“水流闸门具有高度可见的位置指示器，易于控制谷物流动，同时卸载.WEATHERGUARD ROLL-TARP• To protect your harvested crop, the weather guard roll-over tarp is standard on models 1519, 1319和1119 and is optional on model 1019.水箱标准特征 The 19-Series X-TREME features durable, high-grade enamel paint that is baked on in tractor red or green for a long-lasting and smooth, automotive-like完成.• A conveniently located wheel-operated gravity unloading door, 在螺旋钻槽上找到, 易于清洗.• 侧装观景梯, and front and rear shatterproof windows allow you to easily monitor the contents inside the tank.• 标准运输链.O.T. approved flashing LED taillights, 侧标灯, reflective markings and SMV emblem are included for safer road transport.内置可靠性 X-TREME谷物车系列具有行业领先的底盘选项，因此您可以选择合适的底盘来满足您的操作需求. Choose from high-flotation single wheels and tires, the 42” wide Equalizer® track system, 36” wide traditional track system or optional straddle duals for model 1019.耐久性• 所有型号均采用铸造2“单唐结与光滑的倒角开口和衬套，适合众多的结销尺寸, allowing the cart to trail smoothly.• The heavy-duty side-wind jack is easy to operate for convenient tractor hookup and storage.• 独家设计的, heavy-duty 45° gearbox features a 1 ¾” output shaft for long-term, 无故障运行.HIGH-FLOTATION单打• 模型1319, 1119和1019可提供高浮力单轮和轮胎，根据型号提供各种轮胎尺寸. 模型1319, 1119和1019可以配备刚性轴，而1119和1019可以配备可调节轴，以满足个别种植者的喜好. Model 1319 features 12-bolt hubs while models 1119 and 1019 are equipped with 10-bolt hubs. Each hub is manufactured from special alloy, high-strength steel with gusseted reinforcements for 无故障运行.36”宽传统轨道• 36“宽轨道带105”的地面接触长度具有4转向架设计，可用于型号1519, 1319和1119. Models 1119 and 1019 can be equipped with a 2-bogie track with 87” of ground contact length.• 40“端轮设有10螺栓轮毂，润滑脂与三唇密封和钢护最佳润滑. Purgeable grease hubs ensure the operator can “purge or push” out any dirt and debris from the hub, increasing the life and eliminating down time.• 为了更经济的设计, 型号1119和1019可以配备一个36“宽轨道带75”的地面接触长度和2个转向架车轮.• 32“主端轮设有8螺栓轮毂，润滑脂与三唇密封和钢护最佳润滑.• All 36” tracks utilize hydraulic belt tensioning adjustment for easier track alignment, optimum ground contact and even weight distribution. The conveniently located PSI gauge allows the operator to easily check the pressure, ensuring the proper tension is being applied to the belt.• 铸铁旋转中辊与主端轮在同一平面上，以获得最佳浮选效果并减少皮带上的应力.• 独家 rubber belt construction molds the tread, guide lugs and belt together as one piece, increasing durability and eliminating the need for glued components.42“宽均衡器轨道• 42“宽轨道带105”的地面接触长度和4-转向架设计可用于型号1519和1319. 42“宽轨道带与105”的地面接触长度和2转向架的设计，可在型号1319. Model 1119 can be equipped with a 2-bogie Equalizer track with 87” of ground contact length.• 均衡器轨道系统具有专利设计，具有8°的左右弧度和20°的前后支点，每个轨道独立运动，在不平坦的地形上提供均匀的地面接触. 标准的自动润滑脂系统提供了自动应用润滑脂在更频繁的间隔一致润滑.• 40“主端轮设有10螺栓轮毂，润滑脂与三唇密封和钢护最佳润滑. Greaseable hubs ensure the operator can push out any dirt and debris from the hub, increasing the life and eliminating down time. 铸铁旋转中辊与主端轮在同一平面上，以获得最佳浮选效果并减少皮带上的应力.• Standard hydraulic belt tensioning adjustment permits easier track alignment, optimum ground contact and even weight distribution. The conveniently located PSI gauge allows the operator to easily check the pressure, ensuring the proper tension is being applied to the belt. 独特的橡胶带结构模具的胎面和引导耳和皮带一起作为一个整体. This increases the durability and eliminates the need for glued components.Similar models may be shown in addition to the featured model. Equipment may be shown with options. 规范 are subject to change without prior notice.